Public Group
Active 4 months, 4 weeks ago
Group Leadership
- Group Administrators
-
-
In Wall Fireplace – How to Choose the Right Height and Depth for Your Fireplace
A fireplace in the wall gives an elegant and polished look without the expense of mantles. It is one of the most simple electric fireplaces to install.
There are many aspects to take into consideration prior to purchasing your in wall fireplace. Follow these suggestions to get the most of your purchase.
Height
It may appear to be a simple question however, determining the height of your fireplace is among the most important decisions you’ll make. The height of your fireplace can affect everything from how it fits into a room to its visibility. Having your fireplace raised to high could make it look unnatural and detract from the aesthetics of the piece. On the other hand having your fireplace too low could cause it to be lost in the wall space.
Luckily, electric fireplaces are versatile enough to be installed at various heights. Most people mount their fireplaces sitting at eye level. This requires a height of 40-42 inches. Some people put their fireplaces underneath their TVs. This is an attractive alternative.
However, the size of your fireplace will be determined by certain factors, such as the size of the room and the length of the wall where you’d like to put it. The bigger the room the more spacious it will be. This could mean you are in a position to fit a bigger fireplace in it. The length of a wall is also important since a wall that is larger can accommodate a bigger fireplace.
The way you plan to make use of your fireplace is an important aspect. If you plan to use it for ornamental purposes, a lower level will work better. If you intend to heat your home with it, you’ll have to ensure that the fireplace is tall enough to satisfy local codes and safety standards.
It is important to choose the proper size for your fireplace to ensure that it is in line with your decor and is easy to clean or fill. You can always consult an expert fireplace installer to help you if you are unsure about the best height to choose. They’ll be able to suggest the ideal height for your fireplace according to their experience and the specifics of your home.
Depth
It is crucial to be aware of the depth of a fireplace when you are planning to place it in a recessed position. If you are going to cut your wall, make sure that you have enough depth to accommodate the inner design of your fireplace (the smoke shelf that is above the fireplace, the flue that runs through the roof, and the fireplace itself). Also, think about the space you’ll need for the surround and whether you want a mantle.
Many of the latest electric models of fireplaces have the depth of being almost concealed, creating an almost “built-in” appearance. The Panorama BI-Deep series is a great example of this kind of wall-mounted electric fireplace. It has a 5.8-inch depth that allows the viewer to see the flames and the ember bed and not the frame of the fireplace. The media package includes driftwood logs with natural looks, white pebbles or clear glass crystals to add a luster to the embers and reflect the flames.
Wall-mounted gas fireplaces are available in both deep and shallow models. When deciding on the depth of your fireplace, it is crucial to keep in mind that these units are supplemental heat sources and should be properly vented by an experienced professional. The length of the vent pipe, the length of the flue, and the distance between the stove and the vent are all factors that need to be considered when determining the depth of a fireplace made of gas.
Whether you choose a surface mount or a one-piece installation, it’s essential to follow the instructions of the manufacturer when mounting your fireplace. A professional installer is recommended in the majority of cases. It is also recommended to have a second person on hand to install a fireplace.
Addition of an in-wall fire place to your home is an excellent way to increase the value of it and create an atmosphere. It can also reduce your heating costs. It’s also a great alternative if you cannot fit a traditional fireplace in your home due to space restrictions or because of the location of the chimney.
Surface Mount
If you’re unable or prefer not to cut into your wall or create the space needed to install an electric fireplace A surface mount can give you a sleek and built-in appearance. Certain models, such as the Allusion line of electric fireplaces, can be positioned partially recessed into a wall without compromising the output of heat.
To start the installation process, determine the location where you would like your fireplace to be located and make a mark with a pencil along the wall where the bracket will be put. Use a stud-finder to locate the studs, and place each bracket in front of at least one stud for stability. If a stud isn’t accessible or isn’t suitable for your fireplace, you can use drywall anchors to help support the mounting bracket.
After you have identified the location of the mounting brackets on the wall using a power drill, you can use it to install them and make sure they are properly aligned with the studs. You can use studs or anchors made of plastic to attach each bracket. After the mounting brackets are installed, lift the fireplace and hang it from the bracket. Once the fireplace is in place be sure that it is level.
Before you begin the installation, plug your fireplace in and make sure that all features work correctly. Then, light the fire, test the flames, the heat, lighting of the ember bed, and other features. When you’re satisfied with your results, it’s time to install your floating mantel.
Depending on the type of your fireplace, you’ll require a wire connection to the appliance wire connector on the bottom of the mantel or, if your fireplace has hooks or slots on the back connect them to the slots on the wall mounting brackets. Once you’ve completed this step you should consult your fireplace’s user manual to learn how to remove the front glass panel from the opening and replace it.
If you have to alter the height, replace the glass front once you have removed the front panel. If your fireplace has ember bed media, spread it across the top of the grate for an appearance that is more natural and then secure it in place by using the screws that come with it.
Plug-In
Unlike traditional wood-burning fireplaces, electric fireplaces don’t require chimneys or vents. They plug into standard outlets they provide supplemental heating to rooms that are up to 400 square feet. They also have a variety of flame and heat settings so you can customize your ambiance. Certain models come with LED lighting effects that highlight the embers and fire. Some models have a top grille grate that conceals manual controls but opens to reveal pushbuttons to select the setting you prefer.
Plug-in electric fireplaces can be hung directly on walls or built into the wall to create an elegant appearance. These units are usually more straightforward to install than mantel fireplaces. Some units come with a pedestal to allow you to put the fireplace on flat surfaces such as dressers or buffets. A remote control as well as mounting hardware and a log set are included. Depending on the model, electric fireplaces could include flame and heat options that can be switched off for all-year-round comfort.
Some models have adjustable privacy glass that can instantly change from completely see-through to partially transparent. This feature makes these models popular for walls that separate common areas of entertainment like living and dining areas. They can also be utilized in bedrooms where adding the fireplace can be a cost-effective method to cool the space without sacrificing privacy.
While plug-in electric fireplaces don’t require hardwiring as built-in models, they must be mounted within a wall that is at least stud-free and capable of supporting the weight of the fireplace. Some models come with a kit which includes a pre-wired cord as well as a special bracket that makes the installation process easier. This kit is suitable for the installation of drywall or concrete.
When deciding where to put your wall mount electric fireplace, ensure that it’s near an electrical outlet. Depending on the model, plug-in electric fireplaces can be plugged into outlets that are on the same circuit or a dedicated one for your electric fire (http://www.fireplacesandstoves.Uk) fireplace. It is best to choose a dedicated circuit so that nothing else in your home will run at the same voltage and potentially trip your breakers.